Hi, my name is Maro Strifezza (AKA: Mariano Gonzalez).
This is an easy to carry personal stamp, small in size and purposefully square to that end.
You should cut a thin layer of sponge and stick it in the inner floor of the square holder, then soak it in ink so that the square with your name stamp is always inked.
The measurements are adequate so that it doesn´t need an additional edge or some sort of retention. Friction itself will keep it from separating both pieces.
Follow this steps in order to make an adequate print:
1) Download the files.
2) Edit the one which is the square with the letters in any .stl editor. You can import it to Tindercad.
3) Replace the letters with your full name and job position.
4) Save, download and print.
Izi pizi beibi!
If you have any suggestion, please let me know! I will apreciate any comments.
If possible, make a donation, no matter how small.
As of today (April 2019) i am a novice designer, so this early designs are being made on Tinkercad which is the easiest software.