What: Tree Limb Spreader pipe Inserts designed for 15.5 mm (1/2 inch) Schedule 40 pvc tubing. Any tubing that has an interior diameter of greater than 15.5 mm will work.
Why: To spread tree limbs further apart. I needed this for apple trees,
How: Cut 1/2 PVC or other tubing to length, insert printed ends.
Need two per spreader.
Rotate 90 degrees around x axis prior to printing. Print should lay flat.
Cut 1/2 PVC or other tuning to length.
Paint in camo colors so it can hide from you.
Insert Spreaders (one at each end).
Insert part between tree limbs.
Do not fall out of tree.