Designed a vice that is the perfect size for working on small electronics like Flight Controllers. I printed in 100% which was probably over kill and I printed one at 15% and it was fine although I'd suggest at least 50% infill. You will absolutely need supports turned on.
Footprint of Frame: 4" X 2.5 in (100mm X60mm)
Jaw opening: 2.25in (60mm)
You will need:
1 bolt (1/4 in) 4 in long
1 Locknut (the nylon type)
2 1/4 nuts
Very easy to assemble.
Enjoy and if you want to give me so karma drop me a dollar. If not I'll still give you some Karma!
You will absolutely need supports