Waveshare Raspberry Pi Camera Mount for 2020 Extrusion
A camera mount with 2020 extrusion attachment via mast. The mount and camera case are completely clip-fit with no screws or fastenings required.
The camera front and back components allow the camera to either be in portrait or landscape modes.
Recommend printing the cam_mast_XXXmm.stl and cam_front.stl with the print settings below.
The cam_back.stl model however, should be printed with supports and also with a higher infill (possibly 100%) in order to ensure that the clip is as strong as possible.
The height of the cam_mast_XXXmm.stl is from the centre of the bolt hole at the base to the centre of the mount cone at the top.
I will be adding different attachment types in addition to supporting the official Raspberry Pi Camera (both v1 and v2) by adding other camera case options.