!!!!!!!!!!!!! PLEASE READ PRINTING INSTRUCTIONS !!!!!!!!!!!!!
This is a generic mount for DeWalt 18V Type 1 batteries. This model doesn't do much good by itself, but I have included an STL just incase you want to glue it to another part.
I will be releasing future work with additional parts lists to attach it to other devices.
UPDATE: I will be converting the HF tools rather than building adapters. I will be using the clip as and glue it to the base of the drill. Added work-in-progress pics...
I will be doing an old Harbor Freight drill and a Worx Weed Wacker.
If you add your own adapter to this, be sure that you still print it vertically! The clips will NOT hold if you don't!
This print MUST BE PRINTED VERTICALLY! Again, this is a MUST, it will NOT hold the weight of the battery is printed flat.
You may have some sagging from the bridging (I forgot to turn down my temp), so print slow and cold!
- Print Speed 30MMps
- Travel Speed 70MMps.
- 210C (For PLA)
- Use Brim (It will pop off if you don't!)
- Use support touching the build plate (If your slicer doesn't do this, I will make a version that doesn't need it.)