This is a simple mounting adapter that lets you securely attach a 1/4"-20 UNC threaded device such as a magic arm to a table or desk using a readily available, inexpensive C-clamp.
Simply thread the magic arm into the threaded insert in the mounting adapter and use a C-clamp to secure it to a flat surface.
MMC Project Link: https://www.makersmakingchange.com/project/c-clamp-threaded-adapter/
Volunteer your 3D printing skills to help people with disabilities in your community!
Makers Making Change is an initiative of the Neil Squire Society, a Canadian non-profit that helps people with disabilities.We are committed to creating a network of volunteer makers who support people with disabilities in their communities through 3D printing assistive devices. Check out our library of free, open-source assistive technologies with parts and build instructions.
1 – 1/4″-20 UNC tee nut, 5/16″ long
You will also need the following temporarily to install the tee nut:
1 – 1/4″ Washer
1 – 1/4-20 UNC machine screw or bolt, 3/4″ – 1-1/2″ length
Screwdriver / wrench to install tee nut