Loading

MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now

Geoffro

Slimer Resculpted 70mb

by Geoffro Jun 5, 2014
Download All Files

Thing Apps Enabled

Please Login to Comment

does this require supports? and if so, more than touching the base plate? thanks, cant wait ti try and print it!

I did the makerbot 5th gen Mobil app upload/print... I am very happy and impressed.
This slimmer has nice detail; The tonsils, teeth, tung, fingers...
Even the Adams Apple are all good! Thanks.

Hi,
the model is not direct printable. The fingers are too long, so that the base is not touching the buildplate at the first few layers. I changed this and supported the model.
Now the print is running. If anything looks good I will upload a Make tomorrow.

Hi, normally I would agree, but in this case, I've printed it and so have a few others on both an FDM and SLA printers, and as you can see from the photos, he prints quite well. What software /printer are you using?

I print with an Uktimaker2 and use cura for g-code. I aborted the first print after the first 5min because the base were started to print after 8 Layers of fingers. So the base doesn't get solid.
Now with the little plane cut it prints quite well until now.

I am having the same problem with my ANET6... I can not get the support structures up to the other fingers.. The design that I see the other fingers dont start until layer 8/9 and again at 41.. I have tried adding to get supports to go up to these fingers with no luck in Mattercontrol and in CURA... I am sure I am missing something. But until than I cant get this to print.

Just got MatterControl to add the needed structures ! Printed out just fine !