If you're thinking of building a lack enclosure, you might check these out. I got tired of the hinges on the Lack Enclosure. This has "Print In Place" hinges. These are the original height so if you are revamping your enclosure these would be a nice addition. All plexi will work with these as well without modification. This is just the 4 front pieces with hinges. All other parts from the original design will work with them. All .stl files should be oriented correctly. The 2 bottom parts will need supports in the center of the underside around the counter sink and screw hole. I also made all 4 sides support the legs and added the availability to use 4 screws instead of 2.
Atomic Filament PETG
Only the bottoms need support.