A replacement hinge pin for the Flymo Turbo 400 lawnmower. The original kept falling out so I designed this one.
any PETG or PC
original is black
Keep the orientation, no supports are needed.
This needs to be strong, so adjust the following setting in your slicer:
- Print slightly hotter than usual, in the top range for your filament
- Set wall thickness to at least 2 mm and add a lot of infill
The part is slightly oversized, so you may have to tap it with a hammer to insert. This is intentional to prevent it from falling out like the original does.
The woderful picture is from the Flymo website with my edit ;)