Stick grip for a Fokker Eindecker, in 100% scale and 1/32.
Made to replace a part from a 1/32 model which pinged out of my tweezers, never to be seen again.
100% scale included in case anyone wants to use it on some other scale.
Chinese cheapo PLA, but any material should be OK
For the 1/32 model, run as slow as possible (it only takes a few seconds anyway), with the finest nozzle you have. I had to increase the size of some parts a little because Slic3r left bits out when slicing for a 0.4mm nozzle.
I trimmed the outside a little while it was still stuck to the (glass) bed.
I still wound up having to drill holes (1.5mm and micro-drills) for the openings, and file off the outside.
The beauty is that even if you destroy one trying to improve it, it costs nothing to do it again. I needed to do 3 before I got a good enough result.