Big shoutout to w0rkfl0w for helping me with test prints ;D
I made the insides 10.4mm and 8.4mm because it seemed more accurate.
Tolerances are 0.2mm so print this first- https://www.thingiverse.com/thing:3569489
Utilizing print in place one-way bearings. No support needed.
This is a design I came up with after working on my 608 Bearing Replacement. Using a 1-way bearing I figured why not try to make a ratcheting tool for lite duty, just to see if it would work. ;D
More sizes available, just check my page :)
If i made a positive impact in your life please support me via paypal :D
Thanks for stopping by, come back soon ;)