Screwdriver with bits in the handle and magnetic cover.
- handle length is 105mm, 9 bits fit inside
- 80mm handle length, 6 bits fit inside
- bit adapter with 25mm shank
- 6pcs. 5x3mm magnets
The bit adapter is glued in with cyanacrylate (super glue), put a couple of drops at a distance of 1 cm from the edge of the handle, lightly insert the adapter bit, then rest it on the floor with body weight and sharply insert it into the handle.
Magnets are also glued in with cyanoacrylate.
Printed with a filling of 80%, 4 walls.
only yellow :)