If you've got one of these Akro-Mils Parts Cabinets:
Model 10724, 10726, 10744, 10114, 10126, 10144
.... Which use an Akro-Mils 20-702 Drawer (the dual size single drawer)
.... and you find that there is an awful lot of potential for sorting your storage more efficiently, but not with the standard 1-wall divider that you can purchase, these removable trays are for you!
Trays are provided in a myriad configurations:
- 1 long + 10 slots
- 2 long + 10 slots
- 3 long slots
- 4 long slots
- 6 slot
- 8 slot
- 9 slot
- 10 slot
- 12 slot
Each model is designed as a removable tray and "slides" into the pre-existing divider rails that are part of the drawer itself. Many also have a tiny handle to help you remove the tray from the drawer whenever you like!
I didn't get around to it, but you could easily remix these to make them stackable to stack 2 high in a drawer, but you would obviously lose a lot of capacity per slot.
Enjoy the extra storage space and better organization!
Please Note: It seems there are some significant design tolerances in 20-702 parts. These trays fit about 1/3 of my 20-702 drawers properly. On some drawers, however, they are slightly too long. This does not affect the function, but it does bulge out the back of the drawer a bit - although this also does not interfere with drawer installation in the slightest, at least not for me. That being said, you may want to test-print one before going to town on these things and adjust the length by a very small margin as you need.
Printed on a Taz 6 in Advanced PLA with an IT Works 3D Titan Aero Pro Hotend with a 0.8mm nozzle.
eSUN Advanced PLA