I needed an elegant way to mount a Logitech C920 camera to my HE3D K280 printer. The stock housing works great as a web cam, but doesn't mount well to a printer.
To use this you will need to dissemble the stock housing. I had to break some parts of the housing off. Note that this will render the microphone useless, but you don't need that anyway with OctoPrint.
You will need to salvage the heatsink, that is attached to the inside of the stock housing. Then attach the heatsink to the mount using double sided tape. Note use the camera board to place the heatsink.
To assemble you will need;
- 4 x M3 x 16 socket head cap screws.
- 2 x M4 x 8 socket head cap screws.
- 2 x M4 Hammer Nuts.
- 1 x Custom Logitech Heatsink (Reused)
- Double Sided Tape