I wanted to run my filament guide along side the drive cable back to my dry box, but have it easy to remove for maintenance. I modified the reverse bowden drive cable clips so that they clip onto the PTFE tube instead of slipping over them.
• Use the normal version to secure your PTFE tube to the cable.
• Use the +5mm and then the +10mm clip to move the tube away from the drive cable so that it lines up with the hotend. I recommend using https://www.thingiverse.com/thing:3384514 to secure the PTFE tube above the Zesty Nimble.
If you want, you can buy me a coffee at https://ko-fi.com/vampyrex13.