This project will allow you to convert your - Mi smart plug WIFI or ZigBee China to any type of world wall socket.
BEFORE YOU PRINT !!!
You need to:
- know how to use soldering Iron
- 4 small screws (I used 2x8 wood type)
So, You are ready?
- Make sure what version you have - WI-FI or Zigbee
- Follow Post-Print Instruction.
- Solder short cables to (2 cables to negative, 1 cable to Line In, 1 cable to Line Out)
- Put a screw type connector for your cables
- Print !
- Put everything together as shown in photos.
- Share your make !
As always - skechup file included - fell free to remix and share !
Consider tipping me if you are satisfied with my design ;)
How to disassembly Xiaomi Smart Plug? - Use knife to take slightly cut plastic where 2 types of plastic meet
Use force, but don't cut yourself
Congrats :D You opened it!
Should look like this (Wi-Fi version)
Desolder 2 pins
Use coper cable with flux to do it
One is done here
When you done with both. Plastic should come apart easly
All you need
Cut extension cord in half
Secure cable with holder and screws
Connect all cables to right places
Make screws tight - so the connection will be secure
Put cover and it's done! :)