Simple bolt on GoPro Hero mount for the Hyperlite Floss 2 and 2.1. This mount has no props in view, even with 7" props. Two M3 bolts go through the front standoffs and one through the center of the top plate (with room for a washer). Designed to be printed in TPU with 0.3mm layer height, 20% infill. No supports needed. I've included one file with an easily removable brim if you have trouble with the print coming off the build plate.
I have added a small tool you can use to help you install an M3 nylon nut on the center bolt. It can be a real pain holding it in place with tweezers while trying to line up the bolt. This tool should help you hold it in place while screwing the bolt down.
Print it laying on it's side. The slot for the record button should be on the build plate.