MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.
I use a 5 mm brim. Two layers top and bottom. %10 infill. If you over-extrude you're not going to fit this together. I don't know if I will ever get it apart! I added some foam to cushion the board and keep the battery from moving around. I included the Sketchup files if you need to mess with them (like to fit a different antenna) . You will also need a small L type male SMA antenna for this to work with the slip case I made. The 90 degree one fits in and is protected by the slip cover case.
Remember to come back and post what you've printed as Make.
It's good for the designer and the community (that means you)!
To post a Make, come back to this Thing and click Post a Make.
Or, you can use the Thingiverse Mobile app found on
and the Apple App Store.