This is an insert for Gloomhaven. It's based on the excellent Monster All In One Containers by YY-Guys (and the corresponding remix adding labels by jgrg1). Please start there and see if you're willing to put in the time and filament needed to print everything out.
After printing a complete set of the monster containers linked above, I realized I didn't have a good way to store them. Things quickly got out of hand and I ended up with this project as a result.
This is my first attempt at 3d modeling. Please look everything over carefully in your slicer program and let me know if you have any issues or concerns. Many of these parts are designed with VERY tight margins. I apologize ahead of time for space and sizing issues people may have.
This is designed to support sleeves. I used Fantasy Flight FFS02 Mini European Board Game Sleeves and Ultra Pro CLEAR PRO-MATTE Deck Protectors Sleeves Standard Size Stock #84731. Anything larger than those WILL NOT fit.
This will not accommodate the Forgotten Circles expansion. I will likely need to redo this entire thing from scratch to work in any additional content.
Anyway, here's a breakdown of all the files:
Layer1-1 holds the monster containers. Print 2 of these. They sit on the bottom of the box.
Layer1-2 and 1-3 are spacers that can hold extra parts. They're meant to frame a section for the class miniature boxes. I put my standee holders in these.
Layer2-1 sits on top of 1-2, 1-3, and the miniature boxes. It has two sections for mini cards and one section for standard sized cards set at a slant. The two mini card sections will store all shop items and the random dungeon cards. The slanted section will hold the Personal Quest deck (and the dungeon generator cards if you don't mind a tight fit).
There is a full compliment of dividers designed for 2-1. These are based on dta333's "Gloomhaven Car Dividers".
Layer3-1 holds the irregularly shaped and rectangular map overlay tiles (with labels included). There are some "dead zones" planned out so you can get your finger under the middle areas.
Layer3-2 holds all the hexagonal map overlay tiles (with labels included). Each unique tile should have its own space. I used this reddit wiki post as my reference. Please see the pdf linked there if you are confused about where everything should go.
Layer3-3 holds the Road and City Events decks. Print 1x "Divider-City-Events", 1x "Divider-Road-Events", and 4x "Divider-Standard-Blank-Center-Tab" if you would like additional dividers for locked and used cards. I like to stack the cards horizontally when packing away the game but I rotate them to be vertical when I'm playing the game for easier filing.
Layer 3-4 holds the active party. There is room for 4 players, including their tokens, mini cards, standard cards, and spot in the middle that can hold most of the miniatures if they are put on their sides. You should be able to put 4 character boards on top of it all.
Layer 4-1 is a simple box that frames 4-2. It can hold spare components. I've put my hp/xp trackers in this.
Layer 4-2 has room for 5 small stacks of mini cards. I've put my battle goals, monster attack modifier decks, and the bless/curse cards in this.
You will need to visit pdoronila's Gloomhaven Insert for the token holder. It's labeled as GH_Insert_Tray_4.
I store all of the 2-sided map tiles in an alphabetized accordion folder. There's just no better way to do it.
Upon request, I am going to be uploading some smaller, split up versions of the larger pieces. I have not tested these but they are similar to other split files I've encountered. Please let me know if you have issues with these.