A simple but smart way to organize your cables. It snaps together but can be seperated to add new cables.
Print one bottom and one top-part. The "Block" bottom part has two thin walls that will block the cables from sliding out. If they are to high just cut them after printing.
You will need four zylindrical magnets (8mm diameter / 3mm height). If your printer is exact enough you wont even need to use glue.
Make sure to rotate the print in your slicer so the opening for the magnets point upwards.
Insert four cylindrical magnets into the holes.
Size of the magnets:
- Diameter: 8 mm
- Height: 3 mm