Loading

MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now

JamesInFrisco

Disco Stabilizer Optimized

by JamesInFrisco Mar 8, 2019
Download All Files

Thing Apps Enabled

Please Login to Comment

Hi. Very good design.
Does is make Disco sound louder or more quiet?

Salut jamesinfrisco superbe réalisation
comment ce procurer le fichier ou la pièce rouge qui englobe le nez du disco
Merci d’avance

Good question, I fly with many different configurations that all effect the CG but the flight controller seems to deal with all the variances quite well. I toggle between Turnigy 4000 ma batteries to stock batteries each altering CG from one flight to the next. Different Fins, skids, 360 cameras, camera guards and so on but I've never had any issues. But to be fare early on I detected that there was a big issue with the stock Disco wings flexing WAY TOO MUCH at various times in flight (used a Insta360 camera to film it) which did have a big impact on the flight controllers sanity so I resolved all the flaky issues by covering the leading edge of both wings with the mesh reinforced duck tape. Makes the wings super rigid and so that probably has helped or allowed the flight controller to now focus on or deal with my constant CG changes.
Oh and the Red form fitting Camera guard/shoulder pads/skid plate is WIP or Work In Progress.

thanks for the feedback much appreciated. You planning on publishing the red part? ;) i printed your other cam guard several times as it saved my skin and cam a couple of limes after bad landings

cool design. bit doesn't this screw up the cg? being so far back?

second question, the red protector in the front, also printed and does this balance the wight of the fins in the rear?