Various accessories for a Hyperlite Glide fpv frame.
- A GoPro session 5 mount that will fit TBS ND filters (around 1.5-2mm thick)
- FPV Camera mount (you'll need 2)
- Stack plate for various accessories (30,5x30,5 mounting + 20x20 holes, can print using hard plastic, the holes will be fine)
- A capacitor holder that will go on the standoffs behind the center stack (hopefully)
- A sma antenna holder
- A multipurpose rear plate (in case you want to put more things on the rear platform)
- added a multi-purpose plate that fit on top of a 30,5x30,5 mm stack (over an ESC for example).
- 2019-03-10 :
- Updated GoPro mount to v4, this version seems quite good (no black corners, solid front part)
- Uploaded some pictures
All those should be printed using TPU filament. The holes for standoff mounting are smaller than 5mm in order to tight fit. This won't work if you use hard plastic ...
be careful :
- not all components will fit your particular build or need.
Feel free to comment, i'll improve parts as soon as possible.