This item provides a way of attaching the ATX power supply to your printer's frame. All you need is 3 or 4 of these holders and you can zip-tie it in almost any position. The triangular supports can be bolted, riveted or attached using double sided tape to the case of the power supply. After attaching multiple holders to the case of the power supply, they can be zip-tied to the frame of the printer. Check the omage and the video for example.
Recommended slicing options:
-3 top layers
-3 bottom layers
-0.3 mm layer height
- PLA (ABS would crack - do not use ABS)