Loading

MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now

Hey! This thing is still a Work in Progress. Files, instructions, and other stuff might change!
jup2000

Ridgid R4512 Table Saw Blade Guard Dust Hood

by jup2000 Mar 4, 2019
Download All Files

Thing Apps Enabled

Please Login to Comment

Hi, @jup2000, what orientation did you print it?

Just like that. You will need minimum support over the free floating edges but you shouldn't need any inside. There should be enough of a slope to not require it.

Thinking more about it, you could flip it upside down and print from the hose opening up and not use any support at all. I haven't printed it in awhile, but I always design things for zero or very minimal support. Again that slope will allow the print without support.

Printed ok, Ender 3, Layer hight: 0.12; Nozzle: 0.4mm; no support inside + raft. Print time ~24h

@jup2000 can you share your design file, I would like to make a modification to better fit my table saw (Woodtec XW029)

Have you considered making a 3D printed zero clearance insert for this saw?

I did, but got lazy and bought the Leecraft one. I'll probably eventually get around to make for my dado set. It shouldn't be too hard using the Leecraft as a template. I'll marinate on the idea.

Ok cool, thanks for the quick reply. I hate the stock plate that came with my saw because it does not sit flush with the table so I have so shim each tab with 1 or 2 washers. The counter sinks are also sloppy, so some of the screw heads stick up. When my printer comes in I'm definitely going to try out the blade guard dust hood - thanks for sharing :)