Replacement Bottom Housing for the Ender 3 PRO to hold 4 TL Smoothers.
I could not find anything that allowed me to mount TL Smoothers neatly inside an Ender 3 PRO, so here is my take on what works for the smoothers I purchased.
I've added as much ventilation as I thought necessary/possible and included a second fan mounting position for anyone like me who is paranoid that one fan is not enough.
The smoothers this was designed around measure 28.5mm x 49.5mm and have the connectors mounted horizontally to the PCB. I'm fairly sure the PCB's with vertically mounted connectors would fit too, but as I don't have any I am not absolutely positive.
Uses all stock hardware/screws.
Hope others find this useful. Enjoy...
No Name Any
These are the smoothers I used. They measure 28.5mm x 49.5mm
TL Smoothers and stock fan mounted. I didn't have a second fan at the time of this photo but will be adding it soon.
Need to be creative with the wiring, it's a tight fit. You have to keep the wires clear of the fan(s) so as to not restrict air flow too much. I also took the opportunity to wire the fan directly into the 24v so it's on all the time.
Made in Fusion 360