Desktop figurine of a Rocket ship with a turtle character I designed inside. The windows of the rocket ship is through hole so you can see the turtle.
I added some supports already inside the rocketship so don't add any supports inside, only add supports on the exterior wings of the rocketship. See screenshot!
**I am continuously improving this Thing file, please see the "Updates" section below.
Removing Supports after Print:
When I removed the supports, the main thruster popped off, it's not suppose to. I will post an update to fix this issue.
Near end of print:
Printing Process (boring videos, but good for debugging your prints, so watch these videos below if you have trouble printing a certain area of the model, hopefully this will help. Pay attention to the speed of the printer):
I noticed in my first print that the bottom blaster didn't print well, there was some more debugging to do with the model, I have updated the STL file with a fix, but yet to print test it. This is why the pictures / videos don't have this fix yet.
Update on March 2, 2019:
As shown in the above linked Youtube video where I remove the supports, the bottom main thruster popped off. So I have redone a portion of the rocket ship and updated the STL & factory files. I also included a larger version of the turtle for a second option of the model to print. I will do a test print a little later and upload more pictures. Also, the rocket is now 2 separate parts, so it's easier to print without stringing on the interior roof of the rocket which I noticed in the first print.
I will also keep a copy of the old file if anyone prefers that one, which is one whole part.