MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now



by diman77 Mar 2, 2019
Download All Files

Thing Apps Enabled

Please Login to Comment

Could you share the source file? :) I would like to add mounting holes to the opposite and flip the case 180 degrees :)

I like the case!
Can you make a 80mm Cover with 1,5mm holes for the fan? I cant edit the stl with sketch up.

Yes, of course

A normal 80x80mm fan. But i want to use M3 tapping screws. So the holes for the fan mount have to be 1,5mm diameter. Thank you

Added to the main file

Wow! Thanks. But now they have 3mm holes. I need max 1,5mm ;) :)

Sorry, added new files

Confused about a couple of things.

  1. Where are the display cables supposed to enter the box?
  2. Where are the stepper motor cables supposed to enter?
  3. Same question about thermistor cables and endstop cables.
  4. I assume the fan is meant to be mounted on the outside as once the heatsinks are on the drivers the fan wont fit inside.

1 I do not use the display, if you need to make a slot in the lid
2-4 looks like you are blind, two holes from the side of supply wires to the left motor cables, the right thermistors and endstop, in the middle of the bottom of the extruder, fan and power

the dimensions of the aluminum profiles
for 2020 7mm to groove, 6mm to groove itself , for 3030 11mm to groove, 8mm groove

The notch for 2020 and 3030 must be like 2mm lower or it won't fit the profile (well you can use a cutter, but it's not the best option) :P

Can you make a 3030 version? or share the source file?
Thank you :D

Added version for 3030 profile

skr1.1.stl has a slight inaccuracy, skr1.3.stl is corrected and it fits both Board variants

Is it for Skr 1.1 or 1.3?