In an effort to be a bit more organized with loose screws and such when I take things apart, I decided to make these sturdy and stackable boxes.
It only made sense to make every use of the small print size of the Snapmaker 3D printer so the boxes are just smaller than the bed size. This can also be a test of how well you have your machine tuned. See if you can print it without any warping or need for glue stick, tape, raft, or brim and then you'll know your printer is perfectly calibrated. ;)
Big 4.25 x 4.25 in.
Medium 2 x 4.25 in.
Small 2 x 2 in.
All are 2.5 in. high
.3 layer height to speed things up