DO NOT PRINT - Changes need to be made.
Latest Update: 23/06/2019 - Just a heads up I am still working on this controller. Since my last print I have made some changes to address an issue with not having enough room for the LCD and the Mainboard. I have not uploaded these changes yet. Just waiting on some parts for my printer and will print out the next Rev before uploading.
Still needs a lot of work (not all parts are printed and tested yet)
Basically I've always flown with the turnigy evo and after buying the X-Lite and not liking the small gimbals.
I decided to design my own transmitter based off of both transmitters, and also slightly blending a Xbox 360 style shape into it.
Fits FrSky MC12P Gimbals.(the best gimbals)
Things needed to finish:
JR Bay.✓ (v2 3/2/19)
Internal 18650 Position.✓ (v3 4/3/19)
Rear switch locations.✓ (v4 4/4/19)
External Antenna mounts.✓ (v4 4/4/19)
Internal Antenna mounts
Usb Charging capability.
SD Card Slot.
Usb-C Slot ✓ (v4 4/4/19)
Front Evo switch mount holes slightly to small(need to adjust).
LCD glass need more indent.
Not Planning to include:
MC12P Gimbals - https://www.horusrc.com/en/frsky-mc12p-hall-sensor-gimbal.html?acc=13093
X-Lite Mainboard - https://www.horusrc.com/en/frsky-taranis-x-lite-main-board.html?acc=13093
USB C Female - AliExpress.com Product - USB 3.1 Type C Connector 24 Pins Male Female Socket receptacle adapter to solder wire & cable 24P PCB Board support Module
Issues I've Had:
- 4 hours in on the first attempt at the top half the tree supports fell off the bed. Adding a wide brim fixed this.
- 16 hrs in second attempt the tree supports fror the LCD broke off managed to save by adding a custom hot glue support during print. (Support needs modification or hot glue :). )
I Recommend using a 20mm Wide Brim to hold the tree supports to the bed.
'Brim only on Outside' - not selected.