Upgraded frame parts & 3D prints for the TBS Source Two V0.1 can be found here! https://www.b-lineproducts.com.au/product/tbs-source-two-v0-1-upgraded-parts/
The BEST camera mount around! Thanks to the owners of CherryCraft for uploading their cam mounts which I remixed to fit and work with the TBS Source Two Frame (V0.1). Changes that were made; Offset the cam a bit further forward so the screws to hold the camera in weren't hard to put in, due to colliding with the standoffs; increase the hole size for cam mounting holes; removed the floor so you can run motor cables out underneath cam mount; changed standoff width to suit Source Two frame; put cam angle text embedded in the front of the mount so you can change your mounts depending on the racetrack your dealt and makes them easy to recognize.
Currently in file
- 45 Degree Fixed
- 50 Degree Fixed
- 60 Degree Fixed
- Variable Angle Mount
Please give it a like and share it with anyone you know that uses the TBS Source Two, the more 3D stuff we can have made and with some minor changes to the frame itself we have an awesome, cheap race frame that will work for everyone!
Printed in TPU, 15mm/s, 215 degrees