XYZO Calibration Cube 20mm
Imagine if everyone who downloaded gave a tip?
Please make sure that the Letters are on the correct axis when printing
I was having issues with Z-height The "Standard" XYZ Cube Wasn't cutting it.
By adding the O's to each axis I could see that something was not quite right straight away (as the O became ellipse (slightly))
When modelling this I decided to hollow our the centre as there is no need for it.
By adding a Chamfer to the top and bottom it can printed without the need of all that infill and there is no need for supports.
Files added so far
XYZO - Is that standard
XYZ-O - has holes
Frst numbers in the file is the size of the cube,
Second is the gap between the outer walls and the inner walls.
Third is the recess (extrusion) of the letters and circles (H = Hole).
All letters have a 3mm gap around them, all circles are 10mm⌀
If you want a variation in the model please let me know.
If you print, please post a make and credit where applicable
Want to see cool things like this being printed LIVE 24/7?
Check out: Zombies Maker Space on Twitch!
Please Note the License, anyone found not to be adhering to it with out permission may have action taken against them.