Loading

MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now

delukart

Two Trees Sapphire S Duet Maestro with 5" pannel due display mounts.

by delukart Feb 18, 2019
Download All Files

Thing Apps Enabled

Please Login to Comment

ok, I found it, all I had to do was add the minus sign, anyway thank you

great! glad it is working for you.

sorry i dont have time to teach you.
here you can read and learn more about the board your using.

https://duet3d.dozuki.com

Can you tell me exactly how to do it please, I'm a beginner and I don't understand everything yet

I have the same printer as yours on duet wifi, but my printer and it turned out that it printed mirrored.
I set up my config again similar to yours, it seems to me correctly but when i homing X-axis moves in the opposite direction. From the Duet main panel all axes work correctly -X goes left and +X goes right. did you have a similar problem?
Regards Chris

Your homing x needs to be flipped .thats all. read up on the duet site..
this is from my duet maestro . not sure if the config is same as duet wifi .never checked my other machines for differences.

Thanks for answering, great job, did you made any more modifications, I mean change stepper motors? extruder? etc.
How this printer works on these settings?

i changed a few things..
changed the hotend for a e3D threaded v6 with this carriage https://www.thingiverse.com/thing:3489730

changed to a e3d titan and put my great add-on to my titans (keeps the titan filiment gear clean.)
https://www.etsy.com/DelukArt/listing/579320050/3d-printing-filament-gear-cleaner-for?utm_source=Copy&utm_medium=ListingManager&utm_campaign=Share&utm_term=so.lmsm&share_time=1566993204019

also added gates belts and stepper motor dampeners..

Two Trees Sapphire S E3d threaded v6 dual-cool 5015

Hi, why in this config.g you have the home position on the right corner? should be rear left, is this the current config?
Regards Chris

my machine with these settings homes to the back left corner.

can you please publish your firmware or the json template ? :)

here is my gcode config.
i am still running 1.21

; Drives
M569 P0 S1 ; Drive 0 goes forwards
M569 P1 S1 ; Drive 1 goes forwards
M569 P2 S1 ; Drive 2 goes forwards
M569 P3 S0 ; Drive 3 goes backwards
M350 Z16 E16 I0 ; Configure microstepping without interpolation
M350 X16 Y16 I1 ; Configure microstepping with interpolation
M92 X80.00 Y80.00 Z400.00 E400.00 ; Set steps per mm
M566 X900.00 Y900.00 Z12.00 E265.98 ; Set maximum instantaneous speed changes (mm/min)
M203 X9000.00 Y9000.00 Z1050.00 E5100.00 ; Set maximum speeds (mm/min)
M201 X1800.00 Y1800.00 Z100.00 E5000.00 ; Set accelerations (mm/s^2)
M906 X900.00 Y900.00 Z1100.00 E900.00 I30 ; Set motor currents (mA) and motor idle factor in per cent
M84 S30 ; Set idle timeout

; Axis Limits
M208 X0 Y0 Z0 S1 ; Set axis minima
M208 X200 Y188 Z248 S0 ; Set axis maxima

; Endstops
M574 X1 Y2 Z1 S0 ; Set active low and disabled endstops

; Z-Probe
M558 P0 H0 F120 T6000 ; Disable Z probe but set dive height, probe speed and travel speed
M557 X15:5 Y15:195 S20 ; Define mesh grid

; Heaters
M307 H0 B0 S1.00 ; Disable bang-bang mode for the bed heater and set PWM limit
M305 P0 T100000 B4138 R2200 ; Set thermistor + ADC parameters for heater 0
M143 H0 S120 ; Set temperature limit for heater 0 to 120C
M305 P1 T100000 B4138 R2200 ; Set thermistor + ADC parameters for heater 1
M143 H1 S280 ; Set temperature limit for heater 1 to 280C

; Fans
M106 P0 S0-1.0 I0 F500 H-1 ; Set fan 0 value, PWM signal inversion and frequency. Thermostatic control is turned on
M106 P1 S1.0 I0 F500 H1 T45 ; Set fan 1 value, PWM signal inversion and frequency. Thermostatic control is turned on
M106 P2 S0.7 I0 F500 H-1 ; Set fan 2 value, PWM signal inversion and frequency. Thermostatic control is turned off

; Tools
M563 P0 D0 H1 ; Define tool 0
G10 P0 X0 Y0 Z0 ; Set tool 0 axis offsets
G10 P0 R0 S0 ; Set initial tool 0 active and standby temperatures to 0C

; Automatic saving after power loss is not enabled

; Custom settings are not configured

; Miscellaneous
M501 ; Load saved parameters from non-volatile memory

Comments deleted.

Hey great work, than you for sharing. One question, recently I got my duet marstro and had to install it. Could you please share a high resolution photo of you wiring. Iam not completely sure how to connect the ssr with the maestro. Thanks a lot in advance.

thank you for liking . it is very simple just run + to + and - to - i will take a close up picture later when im around the machine

Hello I have the exact same board just the wifi version. Im just wondering if you can send me the reprap config as im kind of stuck on configuring it. Thanks.

Hey! I\m thinking about buying this printer. Are you happy with the quality after upgrades? Could you show some photos of prints? Thanks!

quality of my prints are great. and i am very happy with my machine. i dont have any pics to share since i cant share pics of client prints.

Hello, thanks for answering, you need your profile, it's fine also that of s3d, then I'll adapt to my needs! Thank you

Ciao, ho la tua stessa stampante, mi occorrerebbe il profilo con le impostazioni per cura o un software di slicer simile puoi aiutarmi?

im not sure what your question is. are you asking about my slicer profile? if so i use only s3d. if you use that. i can share my profile. but the profile changes often due to different filaments and weather.