Just a quick insert for Xia base and expansions current and future.
Firstly, you need to use two other awesome prints for this, one:
"Xia Outfit Trays" https://www.thingiverse.com/thing:3418544
This is such a great design, I usually dislike single wall designs, but I actually started making use of them in my own after these prints...very well done!
"Xia sector holder extension" https://www.thingiverse.com/thing:2803952
Another great design and quick to print...just shrink in Z by about 4mm as it is too tall as mentioned by another printer.
All these trays are solid bottom but to save time/print material you can set your top/bottom layer to 0 and use infill of type honeycomb or something to create a light and fast to print but still strong bottom layer.
Card tray is big enough for sleeves and all base, expansion and community cards you may have.
Ship trays are cut into 4, one for level 1 ships and NPC/comets and another larger one for level 2 and one level 3 ships. Print each tray twice, in proper colour if you can :)
Each tray has room for extra ships in different sizes. Kiln is too big and I put it in the outfit tray and it works...
Token tray is real quick, real dirty, sorry.
Money, cargo and ember/ice trays, pretty straight forward there.
Flight stands go into the spot where the cards once lived.
There is also a card divider file which I use to organize the various cards, print a hand full of these and use as you see fit.
See photos for packing instructions.