Loading

MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now

Goodsons_Hobbies

Goodson's Hobbies 1.9 Beadlock Wheel 07 - "Super 5" 2pc Face

by Goodsons_Hobbies Feb 16, 2019
Download All Files

Thing Apps Enabled

Please Login to Comment

I see a few people have made this without issues, but I am getting one layer on the "back" file when slicing that is inside of the wheel almost at the top filling the inside then goes back to the outside of the rim. So it is causing a separation. I am not a software guy, any way you can look at the file and see if there is anything in there that would cause this?

Are you rotating the file 180* and printing with support, so the only support used is around the outside for the lip? I would recommend doing this. Otherwise I have not had any trouble printing any of the wheels. You may want to re- download the files too, I’ve had a file corrupt and a second download fixed the problem.

I did rotate it. It printed ok, just one fill in the middle. I will try to grab the file again. Thank you.