This beadlock wheel is for 1.9 rc crawler and scaler tires. All variations use a 12mm hex hub. The face prints in 2 pieces so you can print multi colors. Note: they fit together in one direction only due to the 6 lug on 5 spoke pattern.
File naming convention, this will be common to any wheels I post from here on:
GH= Goodson's Hobbies
AA= Wheel model #
BB= tire size 19=1.9 22=2.2
CC= wheel width outside of face to inside of back in mm
DD= back spacing, distance from outside of back to inside of hex surface
For example GH06223310 = Goodson's Hobbies Model 06, 2.2 size, 33mm wide, 10mm of backspacing.
I recommend flipping the "back" file 180 degrees to print on the flat surface and you'll have a beautiful print. Finish this wheel with 5x M3x8 screws or 5x #4 x 5/16 (6mm or 1/4" long screws will work too but won't have as much bite), I recommend self tapping screws.
If you print it, I'd love to see it, share here, or tag me on instagram.
Find me on instagram @goodsons_hobbies