Crusader Indistries: Mercury Star Runner.
There are a lot of other versions of this ship out there in "the verse" but their are usually either direct uploads of the holoviewer model and do not print well, or have lost a lot of detail from being made printable. I have taken the holoviewer model and used as much of the original geometry as possible, modifying and re-modeling where necessary in an attempt to make a printable version of the Star Runner that is as accurate as possible to the original Holoviewer model.
• Complete Hull - For those of you who like support structure, or have DLP-resin or laser sintering printers, does not include guns or turrets, print them seperately.
• Split Hull - For extruder based printers, generated very minimal support structure only for a few small details, may possible print ok without any support.
• Forward Guns and Turret - These are best printed detached so I have separated them out into their own files, you'll need to print 2 turrets and one forward guns.
Notes: This model is very detailed, and thus, looks best printed large. The native size is ideal and gives you a wingspan of about 20cm, but I have printed it on a TAZ2 extruder printer, High Detail preset, at 50% size in ABS and it came out just fine, although you will have a hard time printing the guns and turrets at this size.
Original model created by Created by Cloud Imperium Games, props to them and their excellent art team.
This is what I used to print, and test the model. It should work better in another material, but this is all I had access to.