Here is my Airsoft Glock 18c Extended Magazine Base
It fits right on the Bottom of your Gun.
Glue it into place.
Note: Make sure your Motor Height is set up correct because if you Glue the Base on u cant change it anymore.
Check the Fitment of the Base
Put some Superglue on the Base and glue it into place
Let the Glue fully cure and enjoy your new Baseplate.
Use a Brim of 4-7 Lines if you have Problems withe the Print sticking to your Buildplate.
The Base can Be Printed without a Brim, but if you use a Brim make sure to remove it carefully with a Razorknive.
Print at max. 0.2 Layerheight.
Stay tuned for more Airsoft and G18 Mods.
Also if you like my Work you can leave a Tip.
I can Ship the Item already Printed for you if you are located in germany.
Greatings and Happy Printing Dex.