Here is my Airsoft Glock 18c -14mm Thread adapter.
It fits right in the Stock Hexagon shaped Muzzle.
Its a snug fit. For extra stability glue it into place so you can mount your favorit Suppressor to it.
Note: Dont use to heavy Suppressors!
Check the Fitment of the Adapter
Put some Superglue on the Adapter and glue it into place
- Let the Glue fully cure and enjoy your new Threaded adapter.
Use a Brim of 4-7 Lines if you have Problems withe the Print sticking to your Buildplate.
The Adapter can Be Printed without a Brim, but if you use a Brim make sure to remove it carefully with a Razorknive so you dont damage the threads!
You dont need Support for the Adapter to print if you place it with the bigger side to your buildplate.
If you have Problems with the Print try using Supports (suppurt infill ca.10%)
Print at max. 0.2 Layerheight, otherwise the Threads wont work correct.
Stay tuned for more Airsoft and G18 Mods.
Also if you like my Work you can leave a Tip.
I can Ship the Item already Printed for you if you are located in germany.
Greatings and Happy Printing Dex.
Doesen´t Matter PLA, ABS, PETG, Chose one.