Loading

MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now

jirkachadima

Heatbed mount for Articulating Raspberry Pi Camera Mount

by jirkachadima Feb 2, 2019
Download All Files

Thing Apps Enabled

Please Login to Comment

I printed this in PLA for my MK3S and it was a great snug fit. All was well until I ran a PETG print, at which point the 90C bed temp heated up the PLA enough to sag (and also start hitting the Y-axis). I reprinted it in PETG and it's held up well for more PETG prints. Thanks for the design!

Moral of the story: use a higher temp plastic if you want to print more higher temp plastics.

Yeah, I had the same experience with PLA. The timelapse from the print when it got bent was interesting though :-)

I settled on ABS, but PETG should work as well and might actually be better as it shouldn't shrink as much as ABS does.

The printer is non-enclosed in a shared office, so I'm keeping ABS off the table for the moment. PETG I also printed at 100% scale and it fit just as well as the PLA. So far the PETG version has held up through about a week of nearly non-stop use.

Do you have the files for the rest of the pieces?

They are in the original model: https://www.thingiverse.com/thing:3114849

Articulating Raspberry Pi Camera Mount for Prusa MK3 and MK2
by sneaks

D'oh.... I looked at this on my phone and missed the links in the description. Thanks for the work.