MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now


Prusa MMU2 Reinforced Idler

by Karkovski Jan 30, 2019
Download All Files

Thing Apps Enabled

Please Login to Comment

Did you use a different size bearing on the side opposite the stepper? The diameter of the hole seems to be about 17mm, not 16mm.

I honestly can't tell what happened. Fusion 360 file has a 16 mm diameter, but the uploaded STL has 17 mm... I might've made some changes and exported the wrong file. Should've double-checked the upload - sorry for this! I've reuploaded the file and checked the diameter again. If you do not want to reprint it, just wrap the bearing with some electrical tape - it shouldn't be much of an issue. Sorry again!

No worries at all, I'll just reprint... I just thought I was losing my marbles for a bit there. Thanks for the quick answer and upload! :)

Thank's for the feedback and understanding :) I've uploaded another iteration with just a minor change - a small notch above the bearing to compensate for filament sagging - if you haven't started printing, you might consider downloading the newer version (although the former should be ok with just some minor filing/sanding) ;)