MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now


RC Boat 2204 motor

by Akegl22 Jan 29, 2019
Download All Files

Thing Apps Enabled

Please Login to Comment

Hi, I'm not sure why I cannot see here the hull.stls, or maybe removed from some reason?
If possible please upload again.

Thank you in advance!

I so far have printed the front was waiting to see if you changed the rear to accommodate the moving the prop. Decided to go for ABS since it will be in contact with water. Going to work on printing the rest this weekend. What size servos did you use? Maybe some pics of your interior setup.

HI, if you are using the spare part shaft from volantex its easy to fit it in the hull, just drill it a little bit and glue a brass spacer inside.. the diameter of the wider end of the shaft is 3mm. my propeller is 23 mm away from the backside. and the rudder comes with spacers i used on the boat.. the rudder has limit turn i removed so the boat can turn smaller radius. i used the 9g servo from ali.. but if you have the better metal version MG90 which is few cents more expensive put it in, it will work longer. The boat runs great for me right now.. the battery was 1300 mah.
Its nice to see that you work on this boat! greets

Thanks man I got some wing and quad parts I will use but will need to order the boat parts. Had a little layer shift printing the nose but it was my tallest ABS print also I had to try adaptive layers for the first time lol, but it should be sealed up fine. The rear is printing now about 70% and looks good. Got a month off work needed some projects to keep me busy thanks for your hard work!

Do you plan to model the rudder as well?

Go for the updates. I need to see how it does.

I am doing on it ;) already printed in 40 cm version.. But i have faculty exams in these days