Immediately when I saw this maker coin for the Prusa Community's December print contest I knew I wanted to print this with my MMU2.0. Boba Maker was kind enough to share the files so I could do just that!
This should be a very easy print as long as your multi-material printer is tuned! My shortest print-time was around 6.5 hours for two colors and 13 hours for all five colors.
Just to explain the way I have the files setup;
-Each zip file has folders for 0.2mm, 0.35mm, 0.5mm tolerances for that center body design.
-Each zip file includes the high-infill mesh modifier.
-Each zip file includes a .3mf file for the 0.35mm tolerance (with my MMU2.0 & filament settings)
-The plane zip file has .3mf files for each tolerance.
-My recommendation is to use the plane .3mf files as a template and to swap out the center body you want to print with. This should make it easier to swap out the different designs without having to re-setup all of your settings.
-I've included the high-infill mesh modifier.stl outside the zip files because Thingiverse wants at least one stl.
Have fun & happy printing!
01/30/19 - I've added a new design with the Prusa Research logo as suggested by Boba Maker
AIO Robotics PLA
If using the provided 3MF files note that I've set some settings for my MMU2 outside of the defaults. Please look at these prior to printing to make sure it is okay for your printer or not.
Some other things to note:
-When changing the colors of each object and using the high-infill mesh modifier; the mesh modifier should match the color for the center body. This just increases performance and reduces time if it's the same.
-The purging volumes should be adjusted for your filament.
-In Slic3r PE I set my Elephant foot compensation to 0.2 to avoid fusing