Loading

MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now

pasqo

Da Vinci 1.0 E3Dv6 mod with Filament Sensor and BLTouch Z Probe

by pasqo Jan 27, 2019
Download All Files

Thing Apps Enabled

Please Login to Comment

The FW should work as is as long as you follow the same electronic mods, i.e. same pins etc. Otherwise you will need to make necessary adjustments. If your mod is one to one with mine I can also upload a binary image if you want.
The only thing I can think of is that if the titan extruder comes with a different thermistor than the 100k Semitec that comes with the v6 you may need to change the table. In that case you can use the script I have added in the fork to do that.
Because the carriage you intend to use is not the stock one I’m not sure how easy it would be to repurpose the bltouch holder.
Let me know if you run into trouble with the FW. Good luck!

This is great! I've been wanting to add a BLTouch to my Da Vinci 1.0 (which has been a brick for a couple of years at least). I bought a Titan Extruder (https://e3d-online.com/titan-extruder) a while back and would love to incorporate your BLTouch holder into something like this (https://www.thingiverse.com/thing:2284110). With your forked firmware changes in Github, would I be able to use the Titan and BLTouch?

Thank you for your great work on this!

Da Vinci 1.0 E3d Titan + V6 Direct Drive "Coyote" Carriage v2
by Debio

Any idea if the firmware changes can be made to the 1.0a?

Yes, they can, the Repetier-Firmware-4-Davinci project does support the 1.0A.
In my fork you would have to change MODEL from 0 to 1 in Configuration.h and check pin numbers as the boards will be different.
Also my instructions, board photos, etc, refer to the 1.0 so you may need to manage any other applicable differences.