This a modified version of the Spiked Beta75x canopy, found here (https://www.thingiverse.com/thing:3275140). It will work with any whoop style frame when using the BetaFPV Z02 camera / VTx combo. I added a front mounting tab and the ability to mount the camera directly to the canopy without the additional mount or hardware. Once you place the camera in the holder just use a small dab of hot glue on the front, bottom edge of the board to secure it in place. You can see the dab of glue in the 6th pic. You'll then need 2 - M2x8mm screws to mount the camera holder to the canopy, you could use shorter screws but the camera holder won't be as tight. The 8mm screws are long enough that when tighten down the camera holder won't move. This is designed to be printed in TPU.
This was printed with .1mm layers and a .3mm nozzle.