MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.
This is a FPV mount that replaces the battery hatch on the FT Legacy. All of the gear will mount in the hatch, VTX, Camera and antenna. Currently it is configured to use a Foxeer Monster Mini V3, AKK 1000mw VTX/DVR and Makerfire Antenna. The area for the VTX uses M3 nylon screws so if you have a 3mm tap just tap the 4 holes, drop the VTX in place and run the screws into the tapped holes on the hatch. Or use whatever hardware you would like. The holes for the camera mount are sized so screws can be ran into them and it will tap them as you do so. It worked very well for me and is very secure!
Remember to come back and post what you've printed as Make.
It's good for the designer and the community (that means you)!
To post a Make, come back to this Thing and click Post a Make.
Or, you can use the Thingiverse Mobile app found on
and the Apple App Store.