Loading

MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now

mediaman

Hero Me E3D V6 Volcano Cooling CR-10, Ender 3, & clones

by mediaman Jan 20, 2019
Download All Files

Thing Apps Enabled

Please Login to Comment

if i have a 5020 duct fan, can i just use the part from your original? https://www.thingiverse.com/thing:3182917

Hero Me Gen2 - OEM & 5015 Fans - Ender 3, CR-10

This E3D Volcano version of the Hero Me Gen2 is taller, to deal with the extra 7mm of height on the Volcano hot-end. So I will have to make a Volcano version (longer mount pegs) of the 5020 cooling duct (had not had a request for it until now). I am back from a business trip on the 28th. I can get it done by the following weekend.

Ty. I printed in ABS and the parts had some slack. So I couldn't do part 1 and 2 to tighten very fitty. I ender up snappning the base :( ABS cracks so easily :(. luckily I have my old duct from stock stuff in ABS, so I can print the rest in PLA+ or PETG! Thanks again for all the builds.

What's the diff between this one and https://www.thingiverse.com/thing:3291101 ?

Hero Me E3D V6 Cooling - CR-10, Ender 3, & clones

The difference is about 7mm of height due to the Volcano nozzle this one is designed for. The cooling ducts also have longer mount pegs due to the hot-end height difference.

I am having trouble printing CCR10_HM_Volcano_Dual_5015_Duct_Gen2c. The added baffles near the fan duct tips are causing an awful lot of trouble. When I print (as you recommend with the front facing down) I have two options in cura for support, touching the build plate, or everywhere. Unfortunately custom support plugin is terrible and not working for me, ive looked into every solution. Whats happening when I select support everywhere, is that cura is generating support for the baffles inside of the part, and now blocks any chance of air flow. If I select touching only the build plate, I'm left with 6 overhangs that I cannot generate support from. Do you have a version of this file without the baffles added? Im not skilled enough to modify the part myself

All the parts cooling ducts have been significantly updated in the last few days with larger ducts and tapered tips to move the point of interfering turbulence off the hot-end nozzle tip. These are easier to print and won't have potential blockage problems with supports. The new version of what you want is: HM_Volcano_Dual_5015_Duct_Gen2e attached. In Cura only have supports from the build plate. Also attached is a screen shot of the support settings I use in S3D. You will want to set the equivalent in Cura.

Mediaman, for an Ender 3 with stock extruder but I want to use 5015 fans, which one is the one from your vast collection? Thank you sir!

You want to use the parts from this Hero Me: https://www.thingiverse.com/thing:3182917 That is designed for the Ender 3 with a stock hot-end.

Hero Me Gen2 - OEM & 5015 Fans - Ender 3, CR-10

True! Maybe I just had a bad print of the minimalist? Wish I could help with the troubleshooting but the hot end is all back together and I sure don't want to mess with it now! Prusa holds the heat sink at the top and bottom, for what its worth. Its just a small thin piece on the bottom.
That might make a difference but still allow for good cooling.

Yep, the Hero Me is a great cooling system. I'll check out the Prusa mount design and learn from that. Thanks!

HEy
I really confused, you have alot of versions for the best cooling in Ender 3 but I am a new user for printing. can you help me to choose one of your design. I have Ender 3 and I dont have another fans to change it , just I have those come with printer .....

If you have a stock Ender 3 and just want to use the fans that you have, then you want to be using the following Hero Me remix and follow the instructions for the parts needed for a stock Ender 3. https://www.thingiverse.com/thing:3182917

Hero Me Gen2 - OEM & 5015 Fans - Ender 3, CR-10

Fantastic.

Please consider adding titan extruder direct drive.

I have a tevo flash, which im going to convert to this.

titan direct drive + e3dv6 + volcano ;-P

im printign this https://www.thingiverse.com/thing:3329537
i wish hero me too :)

Creality Titan/ V6/ Volcano Direct Drive with BLTouch

I don't have a Titan direct drive to model against. There are others who have added direct drive options to the Hero Me series. There might be one there, or maybe they have the info to mod one for you. You can check all those out in my collection here: https://www.thingiverse.com/mediaman/collections/hero-me-cooling-systems

Or you could do a search in Thingiverse for 'Hero Me Direct Drive'. I found four, there may be more with a different search: https://www.thingiverse.com/search?q=Hero+Me+Direct+Drive&dwh=645c4625daac852

Any chance to adapt it to a bmg direct drive extruder? I would love to use it

I don't have a bmg direct drive to model against. There are others who have added direct drive options to the Hero Me series. There might be one there, or maybe they have the info to mod one for you. You can check all those out in my collection here: https://www.thingiverse.com/mediaman/collections/hero-me-cooling-systems

Or you could do a search in Thingiverse for 'Hero Me Direct Drive'. I found four, there may be more with a different search: https://www.thingiverse.com/search?q=Hero+Me+Direct+Drive&dwh=645c4625daac852

Thanks for your answer, since this is a new setup i didn't think it would fit on that models, I will give a try and tell you if it works, thanks again!