Rover built to maneuver offroad, with a quite unique "wheel" design.
Does NOT run well on tarmac/inside...
Really fun in the snow! Might work fine in the sand as well.
This is the parts I used to build this RC vehicle: (The motors are way overkill, this thing is brutal!)
2x ballbearing 3x8x3mm
TURNIGY D2826-6 2200KV OUTRUNNER MOTOR
2x HOBBYKING 60A ESC 4A UBEC
TURNIGY NANO-TECH 2200MAH 4S 25~50C LIPO PACK
1 remote control and receiver
Microcontroller Teensy 3.2 (Can be built without)
I added the .stl files for the frame and "drum wheels" if you would like to adjust it to fit other motors etc in Fusion 360.
Frame parts infill: 50%
Drum wheels 30%