Allows adjusting the height of the Z-Axis Endstop, designed specifically for the ADIMLab Gantry printer. Replaces the T-Bracket.
Note: I've heard from a couple of people that adding a small spring onto the screw to push up on the block can also be very helpful.
Print the bracket with high infill so it's as sturdy as possible. The block and Knob require little to no infill.
You'll need the following hardware to assemble
M3 x 50 Machine Screw
2 M3 Nuts
You'll also use the screws/nuts already on the endstop to attach to the block, remove the spacers.