UPDATE! New .stl with better tolerances as requested by the community.
Easy to install nozzle holder with nozzle size text.
This nozzle holder works perfectly together with this 7mm socket holder:
- Unscrew the front leftmost screws holding the computational hardware
- Gently bend the black box with the electronic board down so that the two v-slots in the frame is visable
- Insert the printed nozzle holder and if its a tight fit, hammer it in carefully and gentle
- Screw the two screws in at the front and your all done!
Print with a small nozzle (<= 0.4) at a slow speed to get the v-slots in good shape. Took me 5h to print it. Print it upright but upside down with a large brim.
Print upright upside-down with a large brim.