This is the most efficient 360° cooler for Anycubis Kossel here on thinginverse.
Cooler is designed for 360° air flow around the nozzle.
Peak is cca 2 mm under the nozzle which provides amazing cooling results.
After many attemps to improve cooling capabilities of my printer using downloaded models I become desperate.
So I designed my own.
Model is printed with 0.1 mm resolution for smoother surface.
Using 0.1 mm layer height, 60mm speed and support with 50° overhang, model takes only 1h 18min and 5 g (1,7m) of PETG to print.
I would recommend using temperature resistant materials such as: H-PLA, ABS.
Please rotate the model before printing.
Don't forget to like this design before downloading.
Kossel E3D V6 upgrade guide:
Kossel E3D V6 upgrade guide.
Kossel fan disassebly guide:
Kossel fan disassebly guide.
Kossel adjustible extruder mount:
Kossel adjustible extruder mount.
Kossel fan upgrade guide:
Kossel fan upgrade guide.